EverFocus EDSR100H Manual de Instruções

EDSR100HINSTRUCTION MANUALDigital Single Channel RecorderAbout this manualBefore installing and using this unit, please read this Manual carefully.Be

Display: Press this key to switch ON/OFF.16Display OFFDisplay Date/TimeAnd Operation statusJog and Shuttle DialShuttle : In Playback mode,turn the shu

MUX MAINMONITOR INBack Panel ConnectionsAudio IN : Audio input for recording.Audio OUT : These two audio outputs can be set to “Enable” or “Disable” i

VIDEO IN : The BNC connectors of video input enables the system to receive the signals fromeach camera through the 75 ohm coaxial cables.VIDEO IN /Out

RS232RS232 connector : Connect D-Sub 9 pins connector to RS232 ports for remote control8Back Panel Connections7RS485RS485 connector : Cascade multi Di

MUX MAINMONITOR IN4.1 One Camera Connection.(1 ) :Video out:The Camera Video Output is connected to the Video In at the rear panel.Main Monitor(2 ) :

MUX MAINMONITOR IN(1): Multiplexer VCR Out :This connects to the VIDEO IN connector at the rear panel.(2) :Multiplexer VCR In :This connects to the VI

MUX MAINMONITOR IN4.3 Quad Connection. ( Quad with VCR in VCR out connector)Main MonitorQuad(1): Quad VCR Out:This connects to the VIDEO INPUT connect

MUX MAINMONITOR IN4.4 Quad connection. ( Quad without VCR in VCR out connector)Main Monitor(1): Quad Video Out ( to Video Recorder):This connects to t

INSTALLATION12(1) Insert a HDD (IDE) for Video StorageThe HDD should be set as MASTER.( Normally the default setting of HDD is Master)Notice: After th

MENU6. MENU FLOWTIMER SETTING MENU( See page 16 )DAYLIGHT SETTING MENU( See page 15 )CLOCK/LANGUAGESETTING MENU( See page 14 )Turn the Jog dial clockw

 Refer all work related to the installation of this product to qualified servicepersonnel or system installers. Do not block the ventilation opening

MENU14In CLOCK/LANGUAGE SETTING MENU , we SET(1) DATE : Current dateYear: 2000 ~ 2099 Month: 01~ 12 Date: 01~31(2) TIME : Current timeHour: 00 ~ 23 Mi

MENU156.2 DAYLIGHT SETTING MENUDAYLIGHT SETTING MENUDAYLIGHT SAVING: OFFSTART ON JAN 1ST MONFROM 00:00 TO 00:00END ON JAN 1ST MONFROM 00:00 TO 00:00In

MENU6.3 TIMER SETTING MENUTIMER SETTING MENUWEEK START STOP SPEED QUALITY SETSUN 00:00 23:59 002 HR STANDARD OFFSUN 00:00 23:59 002 HR STANDARD OFFSUN

(4) Speed :When SPEED FORMAT is set to HOUR, the recording speedcan be set from 2/3 (NTSC/PAL)HR to 960HR.When SPEED FORMAT is set to IPS, the recordi

MENU18NORMAL RECORD SETTING MENUSPEEDQUALITYMULTIPLEXERDISK FULL002 HRSTANDARDOFFREWRITE::::In NORMAL RECORDING MENU, we define(1) SPEED : Recording S

(3) MULTIPLEXER:ON/OFF : The user can select Multiplexer connection or One Camera connectionON : The video input from MUX MAIN MONITOR connector at th

In ALARM RECORDING MENU, we define(1) ALARM OPERATION :ON : Records when alarm occurs.OFF : Does not record when alarm occurs.(2) RECORDING SPEED : Th

(4) ALARM –IN TYPE :N.O. : Normal Open,N.C. : Normal Close(5) ALARM - RESET TYPE:N.O. : Normal Open,N.C. : Normal Close(6) ALARM DURATION TIME :Alarm

MENUNote:Alarm Connectors (DB-15)PIN # NAME PIN # NAME1 GND 9 GPOUT2 ALARM 10 DISK_FULL3 RECIN 11 VD_LOSS4 NC1 12 VCR_SW5 NC2 13 ALM_NC6 ALMRST 14 ALM

MENUNormally Closed Connection (use pin # 13 and # 12)82 115 9COILRELAYTo externalequipment23(a.) Alarm outTo externalequipment82 19COILRELAYThere are

WARNINGTO REDUCE RISK OF FIRE OR ELECTRIC SHOCK,DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.CAUTIONDO NOT REMOVE COVER. NO USER SERVICEABLE PARTS

MENUAlarm inThere is one alarm input. Please connect the alarm input in the same sequence as thecamera input BNC.When alarm signal comes in, the Digit

BUZZER SETTING MENUBUZZERALARM –INRECORD -INDISK FULLVIDEO LOSSTIMERInBUZZER SETTING MENU, we SET the buzzer ON/OFF under the following conditions:(1)

MENUARCHIVE SETTING MENUPICTURE SIZETIME STAMPTIME STAMP POSWATER MARKWATER MARK POSMULTIPLEXER720x576ONBOTTOMONBOTTOMNONE::::::6.7 ARCHIVE SETTING ME

MENU(1) RS232/RS485: Choose RS232 or RS485 for activated.(2) RS232/RS485 ID: This entry is used to assign each device with its own ID code, when more

MENU(2) PASSWORD ENABLE :YES/NO : User can set the PASSWORD ON or OFF to enter the system setting menu.YES: Selects the PASSWORD to enter the system s

(5) DISK RENEW :YES/NO : Activates the Renew HDD option.DISK RENEWNO YESPress NO to renew HDD and Press ENTERkey to Exit.MENUNO YESDISK RENEWPress Yes

MENU30(8) CF RENEW:Two of modes for choice, YES or NO.NO: will not format CF cardYES: will format CF card(7) LOAD DEFAULT :LOAD DEFAULTNO YESPress NO

7.1 INSTANT RECORDINGWhen pressed, the pictures being monitoredwill be recorded in the HDD.•The recording rate and recording quality areset in the Rec

Press MENU key and turn the jog dial to select the ALARMRECORDING SETTING MENU.The monitor image will automatically record when alarm occurs and stops

8.1 NORMAL PLAYBACKPress the PLAY key to start playing back the stored image/audio fromthe last SEGMENT.(1) PlaybackPress the REV.PLAY key to start re

The exclamation point within an equilateral triangle isintended to alert the user to presence of important operatingand maintenance(servicing)instruct

Playing Back(5) Frame/Field advance Forward/ReversePress PAUSE key to freeze the picture.Turn the jog dial clockwise to advance the still image Frame/

8.2 SEARCH PLAYBACK(1) Segment Search PlaybackPress the SEARCH key to enter the Search menu.SEARCH MENUBY SEGMENT LISTBY ALARM LISTBY DATA TIMEPress t

Playing Back(2) Alarm Search PlaybackPress SEARCH key to enter the Search menu.Press the keys to move the cursor to BY ALARM LIST and press ENTERkey t

Playing Back(3) Date/Time Search PlaybackPress SEARCH key to enter the Search menu.Press the keys to move the cursor to BY DATE/TIME and press ENTER k

COPYInsert a Compact Flash card into the Compact Flash slot on the front panel.When inserting the Compact Flash card, make sure that the direction of

COPYPress COPY key and then the copy menu appears.COPY39Press the PLAY key to start playing back.PLAYPLAYPress PLAY key to continue Copy Movie File.CO

COPY40Press the PAUSE key to stop continue copy.PAUSEPress STOP key to end play.STOPNotice: Copied images are stored as a movie picture.Copied files a

Interface SpecificationsRS23210.1 Transmission settingThe pin assignment of the 9-pin D-SUB connectorPIN # NAME PIN # NAME1 NOT CONNECTED 1 NOT CONNEC

Interface Specifications4210.2 Remote Control ProtocolA computer or a terminal can be used to control the unit by sending the packet as following.====

2-1. The format of message packet is as follows:Length Byte (Prefix: 0x86, 0x87, or 0x88 ... )Receiver ID high byteReceiver ID low byteOpcode ByteDa

Important SafeguardsRead Instruction---All the safety and operating instructions should be read before the init is operatedRetain Instructions---The s

2-4. Opcode Byte & Data bytes2-4-1. OPcode------------------------------------------OPcode Data1 Function------ ------ --------------------------0

Remote ControllerFigure 145(Optional)11. Remote ControllerThe remote controller is an accessory to enhance thehandy operations of digital video record

Appendix-A12.1 When Recording with 80-GB HDD46LowerLowBasicStandardHighSuperior: 15 kB: 20 kB: 25 kB: 30 kB: 35 kB: 40 kB(Estimated with typical image

12.2 When Recording with 160-GB HDD LowerLowBasicStandardHighSuperior: 15 kB: 20 kB: 25 kB: 30 kB: 35 kB: 40 kBAppendix-A47(Estimated with typical ima

Appendix-B13. APPENDIX-B/SECURITY LOCK SETTINGPress LOCK key, the system will ask for the password. If you entera correct password, the locked keys wi

EverFocus Electronics Corp.Head Office:12F, No.79 Sec. 1 Shin-Tai Wu Road,Hsi-Chi, Taipei, TaiwanTEL : 886-2-26982334FAX : 886-2-26982380USA Office:24

Table of Contents1. Product Overview……….…...……………………………………………………………………………………..………….. 11.1 Feature………...…….…….….…………………………………….…………..…………………………………………….

1. Product OverviewThe Digital Video Recorder is the first true VCR replacement designed particularly for the security industry,seamlessly combining h

Specifications20?7~+40?7Operating Temperature320.8mm (L) x 215mm (W) x 100mm (H)DimensionAC100~240VPower SourceYesWatch Dog TimerBuilt-in real time cl

201091211 1314 1621191817Front Panel Keypads1432. Front Panel Keypads152221435687~LOCK: Press and hold the LOCK button over 3 seconds to lock/unlock t