EverFocus RS232 Manual do Utilizador Página 2

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 2
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 1
PACKAGE CHECKLIST
Please check the box for containing following items:
1 x converter RS232/RS485
1 x adapter cable RS232 9 pin fem. / 25 pin male
1 x power supply 9VDC / 200 mA
1 x manual
SECURITY ADVICES
1. To prevent electric shock caused by lightening a groung path
has to be provided by connecting the GND screw connector to
earth ground.
2. Do not open the unit. No user serviceable parts inside.
3. To reduce risk of electric shock or fire, do not expose this unit
to rain or moisture
WARNING:
This equipment has been tested and found to comply with the limits
for a Class “A” digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commerci-
al environment. This equipment generates, uses and can radiate ra-
dio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause interference to radio commu-
nications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the users will be requi-
red to correct the interference at their own expense.
SETTINGS INTERFACE CONVERTER
SW1: T-ON/R-ON
SW2: DTE
Connect pin 1 and 4, 2 and 3 at the screw terminal block
SETTINGS EDR400 /1600
Menu Camera:
- PTZ ON for according speed dome
- PTZ ID is dome adress
- PTZ setting:
Model: EverFocus ED2200
Baud rate: 4800
Protocoll: 8,1,none
SETTINGS ED2200
- Half duplex (SW501 3 OFF)
- Protokoll A (SW501 6,7,8 OFF)
- 4800 Baud (SW501 4,5 ON)
- adress = PTZ ID
- last ED2200 in RS-485 bus: 120 Ohm termination ON
(SW501 1,2 ON), all other domes termination off (SW501 1,2 OFF)
INSTALLATION WITH ED2200 SPEED DOME
ED2200
TX -
TX +
4
3
2
1
GND
T-ON
R-ON
T-RTS
R-RTS
T-RTS
R-ON
DCE
DTE
EDR1600/
EDR400
COM2
ED2200
ED2200
TX -
TX +
TX -
TX +
120 Ohm OFF
120 Ohm OFF
120 Ohm ON !
ATTENTION!
Ground connection is ne-
cessary for correct wor-
king surge protection!
SW1
SW2
Vista de página 1
1 2

Comentários a estes Manuais

Sem comentários