EverFocus ENVR8304D-8CH Manual do Utilizador

ENVR8304D-8CH 8-Channel Plug & Play NVR User’s Manual

ENVR8304D-8CH 1 1. Introduction EverFocus all new NVR Solution, targeting small-scale installations su

ENVR8304D-8CH 91 configuration this may be the IP address of your router/gateway, or it may be the actua

ENVR8304D-8CH 92 6.6.2 Email You can configure the Email settings for DVR to send Email alert when an e

ENVR8304D-8CH 93 6.6.3 DDNS DDNS (Dynamic Domain Name System) is a service used to map a domain name to

ENVR8304D-8CH 94 6.6.3.1 EverFocus DDNS Note that the DNS Server 1 (6.7.1 LAN) should be set up corre

ENVR8304D-8CH 95 6.6.3.2 www.dyndns.org Figure 6-36 DDNS Service: Select www.dyndns.org from the drop-

ENVR8304D-8CH 96 6.6.4 FTP Set up the FTP server settings to enable the FTP function. The function is f

ENVR8304D-8CH 97 6.6.5 Alarm Server You can send out the alarm notifications to EverFocus’s CMS softwar

ENVR8304D-8CH 98 6.6.6 Network Test The Ping utility is useful in diagnosing connectivity problems by o

ENVR8304D-8CH 99 6.7 Schedule You can set up the recording schedule with the desired time, event types

ENVR8304D-8CH 100 6.7.2 Holidays In addition to set up a weekly recording schedule, you can also set up

ENVR8304D-8CH 2 1.1 Overview Mouse USB Memory StickIR Remote ControlFront ViewRear ViewPower CordeSATA

ENVR8304D-8CH 101 6.7.3 Schedule You can set up the camera recording mode by time of day on specific da

ENVR8304D-8CH 102 1. Select a camera first and double-click on desired start time block (no number on i

ENVR8304D-8CH 103 Apply to Days: This button can be used to copy schedules to other days. Select which d

ENVR8304D-8CH 104 6.8 System Setting You can configure the general settings for the NVR in this menu. 6

ENVR8304D-8CH 105 6.8.2 Daylight Saving You can configure the settings for NVR to automatically adjust

ENVR8304D-8CH 106 6.8.3 User Group This setting page is used for configuring the privilege of the thre

ENVR8304D-8CH 107 6.8.4 User Management You can create multiple user accounts (max: 20 user accounts) w

ENVR8304D-8CH 108 You can further configure each user account and its settings individually, see the ste

ENVR8304D-8CH 109 Figure 6-51

ENVR8304D-8CH 110 6.8.5 I/O Control The I/O Control setup menu is used to define the settings for contr

ENVR8304D-8CH 3 1.2 Features • 8-channel real-time recording and playback at 1080p resolution • Suppo

ENVR8304D-8CH 111 RS-485 PTZ Protocol: Select PTZ protocol, choose from the following protocols: Transpa

ENVR8304D-8CH 112 6.8.6 EKB200 Setting You can connect an EKB200, which is EverFocus’ USB keyboard, to

ENVR8304D-8CH 113 【Key No】 The control key number on the keyboard. 【Action】 Select an item from the dr

ENVR8304D-8CH 114 6.8.7 Miscellaneous You can upgrade the latest firmware, restore the factory default

ENVR8304D-8CH 115 Figure 6-56

ENVR8304D-8CH 116 6.9 System Information You can see the NVR information and Log data in this menu. Or

ENVR8304D-8CH 117 【Lan】 IP 1 / IP 2: Displays the IP address of LAN 1 / LAN 2 set up in the Network or E

ENVR8304D-8CH 118 6.9.2 Log You can choose, display or export log data using this menu.

ENVR8304D-8CH 119 7. Remote Access to the NVR You can access and control the NVR remotely by using the

ENVR8304D-8CH 120 3. You might be required to download ActiveX and JAVA software for viewing the camera

ENVR8304D-8CH 4 1.3 Packing List • ENVR8304D-8CH x 1 • User Manual x 1 • CD x 1 (Please see Note 3.) •

ENVR8304D-8CH 121 7.2 Install JAVA Runtime You need to install the latest JAVA software for stable op

ENVR8304D-8CH 122 7.3 Browser Security Setting 7.3.1 Installing ActiveX Controls Follow the steps be

ENVR8304D-8CH 123 7.3.2 Enabling ActiveX Controls Note this section is only necessary if you DO NOT see

ENVR8304D-8CH 124 3. In the Security Settings window, scroll to “ActiveX controls and plug-ins”. Figur

ENVR8304D-8CH 125 5. Close the window so you are back at the login screen. 6. Click the Refresh button

ENVR8304D-8CH 126 7.4 Remote Live View When you access the NVR using web browser, the remote live view

ENVR8304D-8CH 127 No. Name Description 1 Menu Bar For configuring the NVR. 2 Layout Click a desire

ENVR8304D-8CH 128 Menu Bar: 12345678910111213 Figure 7-16 No.

ENVR8304D-8CH 129 7.5 Camera 7.5.1 Camera Status Figure 7-17 【Camera List】 Channel: Displays the chann

ENVR8304D-8CH 130 7.5.2 Basic User can configure the detailed camera settings, PTZ and tracking function

ENVR8304D-8CH 5 1.4 Optional Accessories • EKB200 (USB controller keyboard: connect to the PC to contro

ENVR8304D-8CH 131 Normal Speed: Select a frame rate per second (FPS) for continuous recording. The fra

ENVR8304D-8CH 132 7.5.2.2 PTZ You can set up the Preset, Auto Pan, Tracking, Pattern and Tour settings

ENVR8304D-8CH 133 Preset: Click the Preset button to set up the Preset Position or the Auto Pan function

ENVR8304D-8CH 134 Auto Pan: You can only configure one Auto Pan sequence. The configured Auto Pan (A to

ENVR8304D-8CH 135 Tracking: Click the Tracking button to set up the tracking function which is functiona

ENVR8304D-8CH 136 Note: Please note that if enabling the Pan/Tilt Limits function, the position of the S

ENVR8304D-8CH 137 Pattern Tour: Figure 7-25 Pattern: You are given 90 seconds to move the camera (via

ENVR8304D-8CH 138 Tour: You can combine up to 16 preconfigured camera positions and patterns into one lo

ENVR8304D-8CH 139 7.5.3 Video Adjust Figure 7-27 Channel Number: Connected Channel: Check the box

ENVR8304D-8CH 140 Brightness: Move the bar to adjust the brightness. Contrast: Move the bar to adjust

ENVR8304D-8CH 6 1.5 Front Panel 51 6 7 82 3 4 Figure 1-2 No. Name Description 1 Power Indicates th

ENVR8304D-8CH 141 7.6 PTZ You can use the PTZ Control Panel to control the connected PTZ cameras, to se

ENVR8304D-8CH 142 7. To jump to a Preset Position: a. Click the Preset button. b. Click the desired P

ENVR8304D-8CH 143 8. Specifications Model Name ENVR8304D-8CH System Operating System Embedded Linux Nu

ENVR8304D-8CH 144 Storage Internal 3.5” HDD 4 x SATA HDD (Max: 16 TB) External Storage 1 x eSATA (opti

ENVR8304D-8CH 145 Name NVR Smart Switch Ports Number of Ports 10 ports 8-port Fast Ethernet 10/100 BaseT

ENVR8304D-8CH 146 Standards IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX IEEE 802.ab 1000BaseT IEEE 802.3z 1

ENVR8304D-8CH 147 Appendix A: Network Overview This chapter will give you a basic instruction on how to

ENVR8304D-8CH 148 Gateway Address Addressees are either local or remote. A gateway address is composed o

ENVR8304D-8CH 149 Pre-Installation Before beginning the installation, please answer the following questi

ENVR8304D-8CH 150 Pre-Installation EverFocus’ NVR can operate using one of three types of networking con

ENVR8304D-8CH 7 1.6 Rear Panel 1234567891011131412 Figure 1-3 No. Name Description 1 Power Press

ENVR8304D-8CH 151 Appendix B: Linksys & D-Link Port Forwarding Typical Linksys Port Forwarding This

ENVR8304D-8CH 152 Click on the “Applications & Gaming” tab. Applications and Gaming allows you to

ENVR8304D-8CH 153 Typical D-Link Port Forwarding This section will cover a few simple configurations for

ENVR8304D-8CH 154 Click Virtual Servers on the left to bring up the following screen. Virtual Servers

ENVR8304D-8CH 155 Appendix C: IR Remote Control The IR remote control is an accessory to enhance the con

EverFocus Electronics Corp. EverFocus Taiwan: 12F, No.79, Sec. 1, Shin-Tai Wu Road, Hsi-Chih, Taipei,

ENVR8304D-8CH 8 2. Installation 2.1 Hard Disk Drive Installation 1. Make sure the NVR is power-off.

ENVR8304D-8CH 9 5. Connect the internal power cable to the HDD. Figure 2-4 Note: The internal powe

ENVR8304D-8CH 10 2.1.1 Hard Disk Compatibility List Please use the hard disk models recommended in the

EVERFOCUS ELECTRONICS CORPORATION ENVR8304D-8CH User’s Manual  2013 EverFocus Electronics Corp www.everfocus.com All rights reserved. No

ENVR8304D-8CH 11 2.3 Basic Connection The instructions below describe the basic connection for ENVR8304

ENVR8304D-8CH 12 2.3.1 Camera Connection Connect the LAN Port of the NVR to the Port 9 of EverFocus’ NV

ENVR8304D-8CH 13 2.3.2 Cable Length Extension The Ethernet connection is effective within 100 meters in

ENVR8304D-8CH 14 2.3.3 Monitor Connection The NVR provides 2 main monitor outputs with identical functi

ENVR8304D-8CH 15 2.3.4 Display Aspect Ratio It is recommended to select the same ratio of the screen re

ENVR8304D-8CH 16 2.3.5 Alarm I/O The NVR provides two alarm inputs and two alarm outputs. Please refer

ENVR8304D-8CH 17 2.3.6 RS-485 Port The RS-485 port, located on the rear panel of the NVR, can be used t

ENVR8304D-8CH 18 2.5 Connecting the NVR to the Network There are three methods to connect the NVR to th

ENVR8304D-8CH 19 Connection Procedure:  The First step is to purchase or make a straight through cabl

ENVR8304D-8CH 20  Take the values for Subnet Mask and Default Gateway and input them into the NVR; the

ii Safety Precautions  Refer all work related to the installation of this product to qualified service personnel or system installers.  Do n

ENVR8304D-8CH 21 2.5.2 Direct High-Speed Connection In a Direct High-Speed Connection, the NVR connects

ENVR8304D-8CH 22 2.5.3 One-to-One Connection You can connect directly without using a switch, router or

ENVR8304D-8CH 23  Go to Start. Double-click on Control Panel. Figure 2-20  Click Network and Inte

ENVR8304D-8CH 24  Right-click on Local Area Connection and select Properties. Figure 2-23  Click

ENVR8304D-8CH 25  To access the NVR from the computer, simply open Internet Explorer and in the addres

ENVR8304D-8CH 26 2.6 Checking the Dynamic IP Address You can look up the IP address and access the Web

ENVR8304D-8CH 27 4. Type the user ID and password. Click OK. Note: 1. The default user ID is admin a

ENVR8304D-8CH 28 8. You might be required to download ActiveX and JAVA software for viewing the camera

ENVR8304D-8CH 29 3. General Operation There are three ways to control the ENVR8304D-8CH: with a Mouse,

ENVR8304D-8CH 30 3. The default user name and password are: User: admin Password: 11111111 Note: For

iii  Follow Instructions All operating and use instructions should be followed.  Cleaning Unplug the unit from the outlet before cleaning. Do n

ENVR8304D-8CH 31 On-Screen Keyboard: Click on a button to input that character. The buttons on the right

ENVR8304D-8CH 32 3.5 Enabling Audio In order to utilize the audio output function, you need to enable

ENVR8304D-8CH 33 4. OSD Root Menu 123456789101112 Figure 4-1 No Name Description 1 Playback Click to

ENVR8304D-8CH 34 4 Channel Click to display the Channel Changing Bar as show below. To switch the selec

ENVR8304D-8CH 35 4.1 PTZ You can use the PTZ Control Panel to control the connected PTZ cameras. To bri

ENVR8304D-8CH 36 9. To operate the Auto Pan function, click the Auto Pan button. 10. To operate the P

ENVR8304D-8CH 37 4.1.1 Express Control of PTZ If the PTZ Control Panel has first been opened and then h

ENVR8304D-8CH 38 4.2 Layout Switching The NVR have 4 screen division types available. The seven layou

ENVR8304D-8CH 39 4.4 Display You can display system and camera status on the live view screen. Follow t

ENVR8304D-8CH 40 4.5 Sequence The sequence function is used to display each channel in sequence mode.

iv This Product is RoHS compliant. Federal Communication Commission Interference Statement This equipment has

ENVR8304D-8CH 41 To enter the Zoom mode: 1. Select a camera and then click the Zoom button on the OS

ENVR8304D-8CH 42 4.7 Archiving the Recordings or Log Data to the USB You can archive the recordings or

ENVR8304D-8CH 43 4.8 Logout You can log out the NVR by clicking the Logout icon on the OSD Root Menu

ENVR8304D-8CH 44 5. Search and Playback You can use the Quick Playback function to play back the record

ENVR8304D-8CH 45 5.2 Playback Bar The playback bar is the fastest way to show video from the exact time

ENVR8304D-8CH 46 No. Name Description 10 Play/Pause Click to play the recorded data

ENVR8304D-8CH 47 5.3 Searching the Recordings for Playing Back You can search the recordings for playin

ENVR8304D-8CH 48 5.3.2 Event Search Figure 5-5 Start Date / End Date: Click to bring up the on-scr

ENVR8304D-8CH 49 5.3.3 Snapshot Search You can display video frames in snapshot and resume a video

ENVR8304D-8CH 50 To resume the video: 1. Click the Search button, the search results are displayed in

v TABLE OF CONTENTS 1. Introduction ...

ENVR8304D-8CH 51 5.3.4 POS Search The POS Search function allows users to search and play back the reco

ENVR8304D-8CH 52 You need to set up the POS settings before searching the video with POS transaction dat

ENVR8304D-8CH 53 6. Configuration The ENVR8304D-8CH can be configured through a series of menus on scre

ENVR8304D-8CH 54 List of Configuration Options: Please find the topic of interest by referring to the

ENVR8304D-8CH 55 6.1 Camera If the NVR doesn’t detect any IP cameras, the Basic, PTZ, Tracking, Patte

ENVR8304D-8CH 56 6.1.2 Basic Figure 6-4 Channel Number: Select a desired channel for configuration. De

ENVR8304D-8CH 57 Event Speed: Select a frame rate per second (FPS) for continuous recording. The frame r

ENVR8304D-8CH 58 6.1.3 PTZ You can set up the Preset and Auto Pan settings in this page. Figure 6-4 【C

ENVR8304D-8CH 59 Preset: You can configure up to 192 preset positions in this field. Figure 6-6 To set

ENVR8304D-8CH 60 Auto Pan: You can only configure one Auto Pan sequence. The configured Auto Pan (A to B

vi 4.3 Channel Switching ...38 4.4 Display ...

ENVR8304D-8CH 61 6.1.4 Tracking Figure 6-8 To set up the Auto Tracking function: 1. Auto Tracking Sta

ENVR8304D-8CH 62 Note: Please note that if enabling the Pan/Tilt Limits function, the position of the St

ENVR8304D-8CH 63 6.1.5 Pattern Tour Figure 6-9 Pattern: You are given 90 seconds to move the camera (v

ENVR8304D-8CH 64 Tour: You can combine up to 16 preconfigured camera positions and patterns into one lon

ENVR8304D-8CH 65 6.1.6 Adjust Figure 6-11 Camera: Select a desired camera for adjusting the followin

ENVR8304D-8CH 66 6.2 Record & Playback You can configure the basic recording settings on the hard d

ENVR8304D-8CH 67 6.2.2 Quick Archive Figure 6-13 You can quickly archive all the recordings to the

ENVR8304D-8CH 68 6.2.3 Playback Figure 6-14 Quick Playback: Check the box to enable the configured pla

ENVR8304D-8CH 69 6.3 Event You can configure the Alarm, Connection Loss, Motion and Other settings in t

ENVR8304D-8CH 70 Auto Lock: Check the box and the events will be recorded in a write protected segment o

vii 6.4.2 Lock / Format ...84 6.4.3 RAID ...

ENVR8304D-8CH 71 6.3.2 Connection Loss Figure 6-16 Camera: Select a camera to be configured. Enable:

ENVR8304D-8CH 72 Output Type: Select an output type when an alarm is triggered. Timeout: Select this o

ENVR8304D-8CH 73 6.3.3 Motion Figure 6-17 Camera: Select a camera to be configured. Enable: Check th

ENVR8304D-8CH 74 FTP Upload: Check the box to enable uploading recordings to the FTP server function. To

ENVR8304D-8CH 75 To Edit the Motion Grids: 1. Click the Edit Motion Grid button, the Motion Setting m

ENVR8304D-8CH 76 6.3.4 Other You can configure the event settings and enable the Buzzer or Email alert

ENVR8304D-8CH 77 6.3.4.2 Disk Temperature Figure 6-20 Log: Check the box to record alarm events to l

ENVR8304D-8CH 78 6.3.4.3 Disk Failure Figure 6-21 Log: Check the box to record alarm events to log d

ENVR8304D-8CH 79 6.3.4.4 Disk Full Figure 6-22 Log: Check the box to record alarm events to log data

ENVR8304D-8CH 80 6.3.4.5 Disk Off Figure 6-23 Buzzer: The buzzer will activate when fan is not worki

viii 7.5.2.2 PTZ ... 132 7.5.3 Video Adjust ...

ENVR8304D-8CH 81 6.3.4.6 Power Loss Figure 6-24 Log: Check the box to record alarm events to log dat

ENVR8304D-8CH 82 6.3.4.7 Network Loss Figure 6-25 Log: Check the box to record alarm events to log d

ENVR8304D-8CH 83 6.4 Disk The Disk menu is used to review the NVR’s hard drive settings and status. No

ENVR8304D-8CH 84 6.4.2 Lock / Format Figure 6-27 Maximum Lock (%): Sets the maximum percentage of the

ENVR8304D-8CH 85 6.4.3 RAID The RAID function (Redundant Arrays of Independent Disks) can enable multip

ENVR8304D-8CH 86 The total capacity of a RAID 5 array is the size of the smallest disk times (N-1) d

ENVR8304D-8CH 87 6.5 Display Setting You can configure the settings for displaying the camera / NVR inf

ENVR8304D-8CH 88 6.5.2 M/T SEQ You can configure up to 20 steps of the sequencing order for the Main /

ENVR8304D-8CH 89 6.6 Network The NVR allows you to use a Web browser to remotely view and manage the sy

ENVR8304D-8CH 90 Static IP: User can set a fixed IP for network connection. DHCP: DHCP server in LAN wil