EverFocus NVR Manual do Utilizador descarregar pdf (Página 75)

NVR8004X

4.7 System Setting

You can configure the general settings for the NVR in this menu.

4.7.1 Date / Time

You can set up the date and time for the NVR.

Figure 4-41

Date: Click to bring up the on-screen keyboard to set up the date.

Time: Click to bring up the on-screen clock to set up the time.

Date Format: Select a date format from the drop-down list.

Time Format: Select a time format from the drop-down list.

Time Zone: Select a time zone for the NVR to adjust to when updating from the time

server.

NTP: Select Disable / Enable for NTP time synchronization.

NTP Server: Displays the time server address that the NVR uses for time synchronization.

Requires operating network configuration and WAN or LAN access to a compatible NTP

server. To find a compatible NTP address, follow the steps below:

a. Use a computer connected to the Network.

b. Click Start > Run > type “command” and then click OK.

c. In the DOS Prompt, type “ping pool.ntp.org” to find out the IP address of an NTP

Server.

NTP Update Interval: The frequency that the system automatically updates the time via the

NTP server. Select Daily, Weekly or Monthly.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 101 102

Sem comentários

EverFocus NVR Manual do Utilizador Página 75