EverFocus EPTZ3150 Manual do Utilizador descarregar pdf (Página 118)

118

5. EPTZ FUNCTION SETUP AND OPERATION

5.1. Manual Control Mode

¾ Manual control: Shift Joystick Up/Down/Left/Right, and turn it

Clockwise/Counterclockwise to control speed dome.

Use the control keys which are Zoom, Focus and IRIS function keys on the

keyboard to Zoom In/Out, focus N (near)/F (Far), or IRIS +/-.

Note: Zoom In/Out control keys will be disabled when entering to OSD menu

mode.

¾ HOME Mode: The camera view will go back to the home position when there is no

keyboard operation in a specific time. The home position and the specific time can

be set by pressing Set + Home.

If you set the time to 0 minute, then the camera will go back to home if there is no

keyboard operation in 5 seconds. This is the minimum no action time for HOME

mode.

Note: If "HOME" function is enabled, dome will go to home immediately after

powering on.

5.2. Auto Tracking Mode (For Auto Tracking Models Only)

¾ User can control “auto tracking” on or off by pressing “81” and Enter key.

¾ User can set “manual select object” on by pressing “82” and Enter key.

¾ Camera can directly go to tracking start point by pressing “83” and Enter key.

5.3. Auto Pan Mode

¾ Two point auto pan: Press A.Pan to enter the auto pan mode, and then the system

will ask you to enter the auto pan speed (1~239). Press Enter to start auto pan.

In order to set the two points, press Set + A.Pan, and then enter the dwell time

(1~127 seconds) of each point. The speed dome begins to pan from point A to point

1 2 ... 113 114 115 116 117 118 119 120 121 122 123

Sem comentários

EverFocus EPTZ3150 Manual do Utilizador Página 118