EverFocus EPN4122 Manual do Utilizador descarregar pdf (Página 83)

EPN4122/4122i/4220/4220i

Pan/Tilt Limits: Check the box if you want to create a zone where the camera will track the

movement inside the zone only.

To set up the limits:

1. Move your cursor on the screen to pan or tilt the camera to the positions where you want the

Pan/Tilt start and end limits are.

2. Click Up, Down, Left and Right to set the positions respectively. The numbers of the Pan/Tilt

Limits will be displayed at below to indicate the configured range of the Pan/Tilt Limits.

Note: Please note that if enabling the Pan/Tilt Limits function, the position of the Start Point

should be within the range of the Pan/Tilt Limits, or there will be a pop-up message showing

“Setting error: Start Point is not inside Pan/Tilt Limits”.

Tracking Mask: Check the box to activate the Tracking Mask function. The movement occur in the

Tracking Masks will be ignored and not be tracked. Up to two Tracking Masks can be configured.

To set up the Tracking Mask:

1. Click the Set button to bring up the window as below.

2. Select a Tracking Mask number from the Tracking Mask drop-down list.

3. Click Add and the Tracking Mask with white frame will appear at the center of the screen.

4. Optionally use the Zoom / Focus / Iris and direction buttons if necessary. You can also select a

pan and tilt speed from the PT Speed drop-down list.

5. Adjust the height and width of the Tacking Mask by clicking the + / - buttons.

6. Follow Step 2 to 5 to set up another Tracking Mask.

7. Click Apply to apply the settings

If you select a Tracking Mask number that has been configured, these buttons

will be activated, meaning that you can test, edit or delete the

configured Tracking Mask settings.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 109 110

Sem comentários

EverFocus EPN4122 Manual do Utilizador Página 83