EverFocus EAN600 Informações Técnicas descarregar pdf (Página 38)

- 38 -

3. Enter a free DVR system description (this text appears in the explorer and is also used

as default description text for VIEWS and CAMERAS).

4. If PowerCon uses different locations for better overview on the system, select a

location. If this feature is not required, keep the DEFAULT setting. For LOCATION

setup, please refer to chapter “Defining LOCATIONS”.

5. If areas are utilized, assign the DVR system to an AREA. For AREA setup, please refer

to chapter “Defining AREAS”.

6. Select the DVR type. After changing the DVR type, the program will ask "Restore

default Camera and View settings?". Upon confirmation with "YES", the program will

create a list with all VIEWS and CAMERAS available for this DVR type. The created

cameras and views can be edited in the EDIT > CAMERA / EDIT > VIEW menus or

through right mouseclick on the camera / view in the explorer: > EDIT.

"NO" preserves the VIEW AND CAMERA list from the default DVR.

7. Enter the IP address or web address assigned to the DVR.

8. Enter the required ports for IP connection.

Required ports for EverFocus DVR, please check these ports also in your firewall setting:

EDR 1600 (from version 3.1)

EDR 400 (from version 1.3): Port 80, 1600, 1111

EDR 1600/400 versions 2.xx~3.0

(not supported by PowerCon!): Port 80, 1600, 1024 to 1125

EDSR series: 80, 1111, 2222, 3333, 4444, 6666

New EDR series (MPEG4): default ports 80, 1600, 37260

+ 3 following ports

(37261, 37262, 37263)

(ports are editable in EDR network menu)

9. Enter user name and password for network access to the DVR (setup in DVR network

settings).

10. Continue with step (1) to add more DVR systems or select CLOSE to exit DVR setup.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 97 98

Sem comentários

EverFocus EAN600 Informações Técnicas Página 38