EverFocus EDR1620 Manual de Instruções descarregar pdf (Página 109)

Connection Procedure:

¾The First step is to purchase or make a straight through cable. We recommend

purchasing one if you have never made a straight through cable. Please remember you

can not use a cross over network cable for this application

¾Once you have a straight through cable plug one end into the LAN port on the back of

the recorder and the other into the router.

¾Now Log into the DVR menu and using the jog dial from the previous chapter go to the

Network Setting Menu. (See page 28 for more instructions)

¾If you have a Linksys Router:

Assign an IP address of 192.168.001.050 to the DVR, a Subnet mask of

255.255.255.000, and a default gateway of 192.168.001.001.

If you have a D-Link Router:

Assign an IP address of 192.168.000.050 to the DVR, a Subnet mask of

255.255.255.000, and a default gateway of 192.168.000.001.

If you have a pre-existing LAN:

Go to a Computer on the pre-existing network and do the following:

o Go to Start, then Run and type cmd and click on OK.

Then hit enter, type ipconfig and press enter this will give you the information you will

need.

100

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 147 148

Sem comentários

EverFocus EDR1620 Manual de Instruções Página 109