EverFocus Flex1.0 Manual do Utilizador descarregar pdf (Página 36)

EverFocus Navigation Access Control Management Software

to the Flex II series controller; if the opening password set in the software is a 8-digit number, the

system may automatically take the former 6 digits when the password is downloaded to the

EFC1XX controller.

Panic PIN: the duress password is used for the cardholder to give an alarm when opening the door

under duress; it is valid only when a door area is set to be password opening. Duress password is a

2-digit number aim at the Flex II series controller. When using the duress password, input the

former 6 digits of the normal password, and then input the duress password, Click “Confirm” to

generate the alarm and the open the door. The duress password of other series controllers is any

2-digit number. For duress alarm, input the normal password and then input the randomly selected

2-digit number, confirm it to generate an alarm and open the door at the same time.

Card expire time: when the mouse clicks the input box, time selection box will pop up with the valid

period accurate to minute.

Delegated authority group: select the authority group of the cardholder from the pull-down box,

set the authority group for the newly added card; when the login user has no the related authority

any more, he/she cannot see the card.

Control mode: the system provides two management modes of control group and card plan setup.

In addition to FLEX II series controller that supports “card plan setup”, other controller supports

“control group” setup only.

Control group: ACCESS SYSTEM control authority setup. The system assigns 01－64 groups of

ACCESS SYSTEM control authority for all cardholders and sets different ACCESS SYSTEM

control rules for different authority groups.

Card schedule setup: card schedule means the access priority rules of the current card in various

controller door areas. In the three kinds of rules for the card, the priority levels are as below: card

plan > control group plan > door plan from high to low level. After the check box before the card

plan setup, the card plan can be set, as shown in the figure below:

The controllers shown on the page of the figure are all Flex II series controllers. Different door

areas of the various controller can use diversified control plans. Different control plans may be

designated for one kind of door area access rules for the card.

!Note: The cards in a group can be assigned with different authority groups on different

controllers. Card schedule setup is valid only on Flex II series controller.

After completing all information and card setup, click the “Add” button, then the system returns to

the “add successfully” box. If the controller has been set in the system and the control group plan

has been authorized on the controller, when the controller is not connected with the computer

during saving, a dialog box of “controller operation timeout” will pop up. If re-connecting the

controller, click “yes”; otherwise click “No”.

Fingerprint enrollment: if the user uses a fingerprint controller, add fingerprint information for the

user herein. Please confirm if the system is connected to a fingerprint scanner before fingerprint

enrollment.

Click “fingerprint enrollment” to enter into the fingerprint management page as shown in the figure

below. Each user in the EverAccess Flex series fingerprint machine has two fingerprints which can

be the same or different.

!Note: to use this function, ActiveX must be opened. See P125，0.1 IE Browser setup. 

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 139 140

Comentários a estes Manuais

Sem comentários

EverFocus Flex1.0 Manual do Utilizador Página 36

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso EverFocus Flex1.0