EverFocus ENVR8304E Manual do Utilizador descarregar pdf (Página 121)

ENVR8304D-8CH / ENVR8304E-8CH

112

6.8 System Setting

You can configure the general settings for the NVR in this menu.

6.8.1 Date/Time

You can set up the date and time for the NVR.

Figure 6-54

Date: Click to bring up the on-screen keyboard to set up the date.

Time: Click to bring up the on-screen clock to set up the time.

Date Format: Select a date format from the drop-down list.

Time Format: Select a time format from the drop-down list.

Time Zone: Select a time zone for the NVR to adjust to when updating from the time

server.

NTP: Select Disable / Enable for NTP time synchronization.

NTP Server: Displays the time server address that the NVR uses for time synchronization.

Requires operating network configuration and WAN or LAN access to a compatible NTP

server. The default NTP address is the NTP server in Taiwan. To find a compatible NTP

address of the NVR’s physical location, follow the steps below:

a. Use a computer connected to the Network.

b. Click Start > Run > type “command” and then click OK.

c. In the DOS Prompt, type “ping pool.ntp.org” to find out the IP address of an NTP

Server.

1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 176 177

Sem comentários

EverFocus ENVR8304E Manual do Utilizador Página 121