EverFocus ECOR960 X1 Manual do Utilizador descarregar pdf (Página 48)

ECOR960 X1

4.4 Display

You can display system and camera status on the live view screen. Follow the steps below:

1. Right-click to display the OSD Root Menu or press the Display button on the front panel to

display the system and camera status.

2. The following icons will be displayed at the top-left side of each camera stream to show each

camera’s status.

Recording

Playback

Fast forward

Fast backward

Back

pause

Alarm Motion Video loss Express copy Audio out

3. The following icons will be displayed at the bottom of the monitor to show the system

status..

Alarm Audio Event HDD failure HD temp. too high

Motion

Video loss

No network

Seq.

4. There are four display modes, and you can click the Display icon or press the Display button

on the front panel to change the display mode: (1) Display the camera and system status

icons. (2) Display only the camera status icons. (2) Display only the system status icons. (4)

Hide both the camera and system status icons.

4.5 Sequence

The sequence function is used to display each channel in sequence and for the configured

amount of time. The default setting is channels 1~16 with a dwell time of 3 seconds each –

repeated. Please refer to 6.8.2 Main M/T SEQ and 6.8.3 Call M/T SEQ for detailed information.

To enable this function:

By Mouse: Click the Sequence button to enter the sequential switching mode.

By Front Panel: Press the “SEQ” button on the front panel to enter the sequential switching

mode.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 148 149

Sem comentários

EverFocus ECOR960 X1 Manual do Utilizador Página 48